Norden's Maxpower Series 6 kVA UPS is an online double conversion UPS that features a single phase in both input and output, and an output power factor of 0.9. This has a tower type design to be used in workstations and critical equipment.
Norden's Maxpower Series 6 kVA UPS is an online double conversion UPS that features a single phase in both input and
output, and an output power factor of 0.9. This has a tower type design to be used in workstations and critical equipment.
GENERAL FEATURES
|
| Model | CN7006MPI/CN7006MPE | |
Capacity | VA | 6000 |
Watts | 5400 | |
Input | Normal Voltage | 220/230/240Vac |
Operating Voltage Range | 110~286Vac | |
Operating Frequency Range | 40~70Hz (50/60Hz Auto-Sensing) | |
Power Factor | ≥0.99 | |
| Bypass voltage range | Max.voltage:230~264Vac Min.voltage:176~220Vac | |
| ECO Range | Same as the bypass | |
| Harmonic distortion (THDi) | <3%(100% linear load | |
| Generator Input | Support | |
Output | Rated voltage | 220/230/240Vac |
Power Factor | 0.9 | |
Voltage Regulation | ±1% | |
Freq. Line mode | ±10% of the rated frequency | |
Freq. Bat. mode | 50Hz / 60Hz (±0.1)Hz | |
Crest Factor | 3:1 | |
Harmonic Distortion (THDv) | ≤2% with linear load, ≤5% with non-linear load | |
Efficiency | >93.5% | |
| Output Waveform | Pure Sine Wave | |
Battery | Battery Voltage | (Standard unit 240Vdc) 192/216/240Vdc (Adjustable) |
Capacity (Standard unit) | 9Ah/12V (7Ah/12V optional) | |
Typical recharging Time | 6~8 hours (to 90% of full capacity) | |
Charging current | 1.35A(Standard unit); Long run unit Max.current 8A(charging current can be set according to battery capacity installed) | |
System features | Transfer time | Mains to battery:0ms; Mains to bypass:0ms |
Overload Line mode | Load≤105% long time running; ≤125% last 10min; ≤130% last 30s; >130% turn to bypass mode immediately | |
| Bypass mode | 40A(Breaker) | |
Short circuit | Hold whole system | |
Overheat | Line mode: Turn to bypass; Backup mode: shut down UPS immediately | |
| Battery low | Alarm and switch off | |
| Self-diagnostics | Upon power on and software control | |
| Battery | Advanced battery management | |
| Audible & Visual alarms | Line failure, Battery under voltage, Overload, System fault | |
| LED and LCD Display | Line mode, Bat. mode, Eco mode, Bypass mode, Battery under voltage, Overload & UPS Fault | |
| LCD Display | Input voltage, Input frequency, Output voltage, Output frequency, Load percentage, Battery voltage, Inner temperature & Remaining battery backup time | |
| Communication interface | RS232, USB,SNMP card(optional), Relay card (optional) | |
Environment | Operating temperature | 0~40°C |
Storage temperature | -25~55°C | |
Humidity range | 0~95% (Non-condensing) | |
Altitude | <1500m | |
| Noise Level | <55d | |
Standards | Safety | IEC/EN62040-1,IEC/EN62477-1 |
EMC | IEC/EN62040-2,IEC61000-4-2,IEC61000-4-3,IEC61000-4-4,IEC61000-4-5,IEC61000-4-6,IEC61000-4-8,IEC61000-4-11,IEC6100-2-2 | |
Physical | Dimension | I:191 x 460 x 720 E:191 x 460 x 337 |
Net Weight (kg) | 69.5 12 | |
Specifications are subject to change without prior notice
| EXTERNAL BATTERY PACK | |
| Model | CNBC06120CT |
| BATTERY SYSTEM | |
Battery Type | VRLA (Valve Regulated Lead Acid Battery - SMF) |
| Typical battery recharging time | 6~8 hours (to 90% of full capacity) |
| Typical Battery Life | 3~5 years, depend on discharging cycle and ambient temperature |
System Voltage | 240Vdc |
| Battery Qty | 2*20 pcs |
Capacity | 7Ah/9Ah (12V) |
| PHYSICAL | |
| Dimension(WxDxH) | 250 x 619 x 616 |
| Net weight(kg) | 122/134 |
| ENVIRONMENT | |
| Operating environment | 0°C~40°C |
| Relative humidity | 0~95% (Non condensing) |
| Noise Level | <40dB at 1 Meter |
| Part Number | Description | ||
CN7006MPI | 6kVA Medium Power Transformerless UPS (Internal battery) | ||
CN7006MPE | 6kVA Medium Power Transformerless UPS (External battery) | ||
CNBC06120CT | 240VDC Tower Mount Battery Pack | ||
| Part Number | Description | ||
| CNS01 | SNMP Card for 10-80kVA 3/1 and 3/3 | ||
