2 CORE 18 AWG SHIELDED POWER LIMITED FIRE PROTECTIVE SIGNAL CABLE

The shielded power limited fire protective signal cable from Norden is suitable to be used for installation in signaling & fire alarm system. It works in high-temperature levels. This cable is constructed with FR PVC Insulation, 100 % Aluminium Foil – Polyester Tape Shield with LSZH fire protective outer jacket.

The shielded power limited fire protective signal cable  from Norden is suitable to be used for installation in signaling & fire alarm system. It works in high-temperature levels. This cable is constructed with FR PVC Insulation, 100 % Aluminium Foil – Polyester Tape Shield with LSZH fire protective outer jacket.


CABLE CONSTRUCTION



SECTION VIEW




PHYSICAL CHARACTERISTICS

Characteristic
Value
No. of Conductor2
Conductor Size
18AWG
Insulation Diameter
1.85 ± 0.05mm
Drain Wire Size
7 x 0.2 mm 
Jacket Thickness
0.8mm
Jacket Diameter
5.3 ± 0.3mm
Min. Bending Radius
10 x OD
Operating Temperature
-20℃ To +60℃


ELECTRICAL CHARACTERISTICS

Characteristic
Value
Unit 
Nom. Conductor DCR
Ω/km
22.5
Dielectric Strength between Pairs
KV/5min1.5
Max. Operating Voltage
V/min 
300 
Sparker Test
VAC
3000 

MECHANICAL CHARACTERISTICS

Characteristic
Value
Test Material
LSZH
Before Tensile Strength (Mpa)
10
Aging Elongation (%)
150
After Tensile Strength (Mpa)
7.0
Aging Elongation (% of unaged) 
120 
Cold Bend (-20±°C x 4 hrs) 
No Crack
PART NUMBERDESCRIPTION
75-12021822 CORE 18 AWG Shielded Power Limited Fire Protective Signal Cable LSZH