Accell Category 6 S/FTP patch cords are manufactured using high quality shielded four pair Category 6 stranded cable, and feature cable strain relief boots with a plug latch protection cap. This patch cord when used with high performance Accell Category 6 connectivity (Solid shielded cable, patch panels and work area outlets), provide superior performance capabilities of high bandwidth (Gigabit 1000Base-T and 1000Base-Tx) applications support. This is fully backward compatible to Category 5e (Class D) products. Each patch cord is tested with Fluke tester and individual cover include with the report. Norden Category 6 Patch cord is tested for transmission frequencies of up to 250 Mhz. Each patch cord is tested with Fluke tester and individual cover include with the report. Accell Category 6 Patch cord is tested for transmission frequencies of up to 250 Mhz.
Accell Category 6 S/FTP patch cords are manufactured using high quality shielded four pair Category 6 stranded cable, and feature cable strain
relief boots with a plug latch protection cap. This patch cord when used with high performance Accell Category 6 connectivity (Solid shielded
cable, patch panels and work area outlets), provide superior performance capabilities of high bandwidth (Gigabit 1000Base-T and 1000Base-Tx)
applications support.
This is fully backward compatible to Category 5e (Class D) products. Each patch cord is tested with Fluke tester and individual cover include with
the report. Norden Category 6 Patch cord is tested for transmission frequencies of up to 250 Mhz. Each patch cord is tested with Fluke tester and
individual cover include with the report. Accell Category 6 Patch cord is tested for transmission frequencies of up to 250 Mhz.
COMPLIANCEIEEE 802.af and IEEE 802.3at for PoE applicationsANSI/TIA-568-C.2 and ISO/IEC-11801 (2nd Edition), IEC 61156-2, ANSI/TIA-568-C.2 and ISO/IEC-11801 (2nd Edition), IEC 61156-2, |
Basic Cable Conductor | Stranded Bare Annealed Copper |
Wire Insulation | SFS PE |
Number Of Insulated Conductors | Blue x White, Orange x White, Green x White, Brown x White |
Individual Pair Shield | Polyester-Aluminium foil |
Overall Shield | Tinned Copper, Braid |
Drain Wire | No |
Outer Jacket and Boots | LSZH Low Smoke Zero Halogen or PVC |
Jacket and Boot Colour | Per Requirement |
Standard Surface Marking | Includes Norden P/N, cable description |
| Cable O.D. | 5.7 ± 0.2 mm |
| Bend Radius | > 23 mm Without load |
| Storage Temperature | -20 °C to +80 °C |
| Temperature Operating Range | -20 °C to +75 °C |
| Flame Test | IEC 60332-1 |
| Halogen Content In LSZH Cables | Null |
| Wire Scheme | T568B |
Impedance @ 1-100MHz | 100 ±15 Ω |
Impedance @ 100-250MHz | 100 ±15 Ω |
Conductor Resistance | < 73 Ω/km |
Contact Resistance | 20 MΩ max. |
Resistance Unbalance | 2 % max. |
Voltage Rating | 72 Vdc |
Dielectric Strength | 1 KV/min. rms |
Ampacity | 1.0 Amps max. |
Insulation Resistance | 150 MΩ/Km |
| Transfer Impedance | N/A |
| Pair To Ground Capacitance Unbalance | 3.3 nF/Km nom. |
Cable To Plug Tensile Strength | 96N min |
Pulling Force | 10 N max |
Durability | 1000 Mating Cycles |
Propagation Delay 1-250MHz | <25 ns/100m |
| Freq. (Mhz) | NEXT(dB) min. | RL(dB) min. |
2m cord 5m cord 10m cord | ||
1 | 68.0 68.0 68.0
| 20.0 |
4 | 65.0 65.0 65.0 | 21.8 |
10 | 64.8 64.2 65.0 | 22.5 |
20 | 60.9 58.6 57.2 | 23.4 |
30 | 56.2 54.9 53.6 | 23.0 |
60 | 50.4 49.2 48.1 | 20.0 |
100 | 46.4 45.3 44.4 | 18.0 |
| 125 | 44.5 43.5 42.7
| 17.0 |
| 150 | 43.2 42.2 41.1 | 16.2 |
| 200 | 40.8 39.6 39.1 | 15.0 |
| 250 | 38.8 37.9 37.6 | 13.8 |
X: BK(Black), BL(Blue), GN(Green), GY(Gray), RD(Red), WH(White), YL(Yellow)
| Part Number | Description | Length |
APC25201X | Category 6 S/FTP Patch Cord LSZH 01m | 1m |
APC25202X | Category 6 S/FTP Patch Cord LSZH 02m | 2m |
APC25203X | Category 6 S/FTP Patch Cord LSZH 03m | 3m |
X: BK(Black), BL(Blue), GN(Green), GY(Gray), RD(Red), WH(White), YL(Yellow)
