POE WALL MOUNT VIDEO INTERCOM TERMINAL NVS-IP100023IC

The NVS-IP100023IC is a POE wall mount Video Intercom terminal, with double-key design which has one-touch calling and one touch alarm to realize full duplex intercom. It is integrated with 1080P HD camera which supports Wide Dynamic Range with functions of strong light inhibition and weak light compensation, enable it to function properly under the circumstance of strong light and weak light. It adopts 6mm thick aluminum panel, with stab protection and special screw which is being able to activate warning siren whenever the equipment has been forcibly damaged. It is equipped with standard RJ45 interface which is accessible to the system wherever Ethernet is available that supporting cross-segment and cross-router.

The NVS-IP100023IC is a POE wall mount Video Intercom terminal, with double-key design which has one-touch calling and one touch alarm to realize full duplex intercom. It is integrated with 1080P HD camera which supports Wide Dynamic Range with functions of strong light inhibition and weak light compensation, enable it to function properly under the circumstance of strong light and weak light. It adopts 6mm thick aluminum panel, with stab protection and special screw which is being able to activate warning siren whenever the equipment has been forcibly damaged. It is equipped with standard RJ45 interface which is accessible to the system wherever Ethernet is available that supporting cross-segment and cross-router.

FEATURES

  • Robust 6 mm aluminium panel with specific screws and anti-stab protection to prevent vandalism
  • Built-in 1080P HD camera, 3W speaker, and microphone for hands-free calling
  • Line-output interface for connection to external active speakers or earphones
  • Relay I/O interface for system linkage or access control
  • Supports offline calling with pre-defined targets on its web interface
  • One-press calling feature with targets set via NORDEN management software
  • Fully compliant with standard SIP protocols for seamless integration with SIP PBX systems like Asterisk, Cisco, Yeastar, etc.
  • IEEE 802.3af interface support for flexible deployment
  • Equipped with online upgrading capabilities and remote management for continuous system improvement


SPECIFICATIONS

Model

NVS-IP100023IC

Power SupplyDC24V/1A, PoE (IEEE802.3af)
Standby Power Consumption
≤3W
Signal to Noise Ratio Broadcast Speaker: 81dB
Broadcast Line: 88dB 

Line-in Record out: 82dB 
Video Transmission Bit Rate 
512Kbps~4Mbps
Video Coding
VGA/720P/1080P 
Built-in Speaker (Power Output)
3W
Built-in Speaker (Impedance) 

Built-in Mic
Electret Microphone 
Built-in Mic (Sensitivity)
-45±3dB 
Built-in Mic (Directivity)
Omnidirectional
Harmonic Distortion 
<1%
Frequency Response
40Hz~10KHz (WAV) 
50Hz~20KHz (MP3)
Network Interface
10BASE-T/100BASE-TX RJ45
Network protocol
TCP/IP, UDP, ARP, ICMP, IGMP, SIP, HTTP, FTP
Configuartion Method 
Web Interface
Mounting Method 
Wall Mounted 
Installation Environment 
Dry Indoor Locations
Operating Temperature
-20℃~55℃ (-4℉~131℉)
Operating Humidity
≤90% RH (Non-Condensing)
Body Material
Aluminium Alloy
Colour
Silver
Back Shell Material 
Steel
Product Dimension
101x191x46 mm
Product Weight 0.95 Kg












Part NumberDescriptionStandard Quantity 
NVS-IP100023IC POE Wall mount Video Intercom Terminal
01

ACCESSORIES INFORMATION

DescriptionStandard Quantity 
Power Adaptor (24V/1A)
01
Allen Screw (M3*12) 
04
Allen Wrench (2.5mm)
01
Wiring Terminal (3.5-2P) 
01
Wiring Terminal (3.5-3P) 
01
Half Round Head Philips Screw (ST4*25) 
04
Red-Black Line (X2-80)
01
Red-White Line (X12-100) 
01
Quality Certificate & Warranty Card
01
Quick Installation Guide
01