Norden Pre- Terminated Break Out patch cord comprises tight buffer fibre housed within a common outer jacket in OM1, OM2, OM3, OM4, OS1, OS2 multi-mode and single mode variants. Both ends are terminated with a high-performance hybrid or single type connector consisting of a SC, ST, FC, LC, MTRJ, E2000 connector in simplex and duplex. Using pre-terminated patch cords can simplify the installation process and reduce the need for on-site termination, making them a convenient choice for various networking applications.
Norden Pre- Terminated Break Out patch cord comprises tight buffer fibre housed within a common outer jacket in OM1, OM2, OM3, OM4, OS1, OS2 multi-mode and single mode variants. Both ends are terminated with a high-performance hybrid or single type connector consisting of a SC, ST, FC, LC, MTRJ, E2000 connector in simplex and duplex. Using pre-terminated patch cords can simplify the installation process and reduce the need for on-site termination, making them a convenient choice for various networking applications.
Telcordia (formerly Bellcore) GR-326-CORE Generic requirements for Single mode optical connectors and Jumper
assemblies.
IEC 874-1 Generic specification for fibre optic connectors and cables
ANSI/TIA-568-C.3, ISO/IEC 11801 2nd Ed., CENELEC EN 50173, UL94V-0
ST, SC, FC, LC, MT-RJ, E2000 connectors
Position A/Position B markings
100% factory transmission tested per ANSI/TIA-568-C.3
Slim-profile boots with durable flexible cable strain relief
|
Range of Mode |
Single or Multimode |
|
Connector Style |
SC, FC, ST, LC, MTRJ, E2000 |
|
Polish or Ferrule Interface Type |
PC, UPC, APC |
|
Lengths |
Standard & Custom Lengths |
|
Strength Member |
Kevlar Yarn |
|
Cable Assembly Length (<15 meter Tolerance) |
-0/+100mm |
|
Cable Assembly Length (>15 meter Tolerance) |
-0/+10% |
|
Durability |
500 cycles(0.2 dB max increase), 1000mate/demate cycles |
|
Installation Temperature range |
-10°C to +60°C |
|
Operation and transport temperature | -20°C to +75°C |
|
Ferrule Concentricity |
< 1μm, Other Ferrule Concentricity < 1μm |
|
Humidity (FOTP-5) |
90-95% at 40°C |
|
Strength of Coupling Mechanism (FOTP-185) |
33 N at 0° for 5 sec |
|
Cable Retention (FOTP-6) |
50 N at 0° for 5 sec. |
|
Twist (FOTP-36) |
15 N at 0° 5 turns, 10 cycles |
|
Flex (FOTP-1) |
0.5 Kg at 25 cm, +90° to -90°, 100 cycles |
| Central Strength Member Material | FRP |
| Subunit Material | LSZH |
|
Item |
Single mode |
Multimode |
||||
|
PC |
UPC |
APC |
62.5/125 |
50/125 |
50/125 10G |
|
|
Insert. Loss/connector (single Fibre) |
0.2dB Max. (0.15dB typ.) |
0.3dB Max. (0.25dB typ.) |
||||
|
Return Loss |
≥ 45 dB |
≥ 50 dB |
≥ 60 dB |
N.A |
||
|
Insert. Loss/MTRJ Connector |
0.5dB Max. (0.45dB typ.) |
0.5dB Max. (0.45dB typ.) |
||||
|
Pull strength |
≥98N |
≥98N |
≥98N |
≥98N |
||
| Geometric Specifications | |
|
Radius of Curvature |
7-25 mm |
|
Apex Offset |
0-50 um |
|
Radial Fibre Height -50 |
-50 to +50 nm |
|
Angular Offset |
<0.3 degrees |
|
Fibre Roughness |
0-25 nm |
|
Ferrule Roughness |
0-50 nm |
| End Face Defects | |
|
Fibre Core |
0 nm² |
|
Mode field diameter |
0 nm² |
|
Ferrule contact zone |
0 nm² |
|
Testing & Inspection |
100% |
| Epoxy | |
|
Temperature Coeff .Tg |
120 |
|
Curing Method |
Out Gassed |
|
Residual Epoxy |
No Visible Epoxy Ring |
| Configuration Control | |
|
Serialization |
Each Cable is Serialized |
