Norden fast connectors are factory pre-polished, field-installable connectors that completely eliminate the need for hand polishing in the field. These fast connectors are compatible with 0.9 mm tight buffer, 2 mm & 3 mm drop cable. This connector during the installation process does not require any adhesive and curing process. It is possible to rework so can be reduced the defect rate by worker’s connection error.
Norden fast connectors are factory pre-polished, field-installable connectors that completely eliminate the need for hand polishing in the field. These fast connectors are compatible with 0.9 mm tight buffer, 2 mm & 3 mm drop cable. This connector during the installation process does not require any adhesive and curing process. It is possible to rework so can be reduced the defect rate by worker’s connection error.
ANSI/TIA-568-C.3
ANSI/TIA-604-3 (SC),-10A(LC) Connector Intermateability
Standards.
Meets GR-326; General Requirements for Single Mode
Connectors.
Easy assembly process
No polish, No epoxy required
Factory polishing eliminates loss concerns
Intra-building backbone, LAN cross connects, LAN & WAN data
transmission.
Direct equipment termination.
Fibre Diameter |
125 μm |
Fibre Cable Type |
2.0 mm, 3.0 mm drop cable & 0.9 mm Tight Buffer |
Coupling Type |
Snap, Push Pull Type |
Tight Buffer Diameter |
250 μm |
Fiber Mode |
Single Mode |
Temperature |
-40 ºC to +85 ºC |
Colour |
Green (APC), Blue (UPC) |
Part Number | Description |
37-SSC3 |
SC/APC Singlemode Fast Connector |
37-SLC3 |
LC/APC Singlemode Fast Connector |
37-SSC2 |
SC/UPC Singlemode Fast Connector |
37-SLC2 |
LC/UPC Singlemode Fast Connector |
37-MLC1 | LC/PC Multimode Fast Connector- Simplex |
37-DLC1 | LC/PC Multimode Fast Connector- Duplex |