30W WALL MOUNT IP SPEAKER NVS-IP100029SP

The NVS-IP100029SP is an IP Wall Mount speaker. There is no need for any extra audio equipment to create a whole system because this speaker is an all-in-one device with a network audio decoder, class-D digital amplifier, and DSP (digital signal processor) built in. Clear, comprehensible voice messages are sent immediately out of the box due to pre-configured digital signal processing. A user-friendly browser interface can be used to configure the speaker. The speaker has capabilities including fault detection and automatic volume control. It can be configured for playing scheduled tasks from server.

The NVS-IP100029SP is an IP Wall Mount speaker. There is no need for any extra audio equipment to create a whole system because this speaker is an all-in-one device with a network audio decoder, class-D digital amplifier, and DSP (digital signal processor) built in. Clear, comprehensible voice messages are sent immediately out of the box due to pre-configured digital signal processing. A user-friendly browser interface can be used to configure the speaker. The speaker has capabilities including fault detection and automatic volume control. It can be configured for playing scheduled tasks from server.

FEATURES

  • Unified design with audio decoder, digital amplifier, and speaker
  • Built-in Class-D digital amplifier with 2×30W output for external speakers
  • Built-in 5" woofer and 3" tweeter
  • Built-in clock chip for NTP automatic timing
  • Offline broadcasting with high-capacity internal flash
  • Local broadcasting via UHF wireless microphone
  • Standard SIP protocol support for PBX integration
  • IEEE 802.3 at PoE+ interface for versatile installation
  • Remote management and online upgrade capabilities
  • User-friendly browser interface can be used to configure the speaker


SPECIFICATIONS

Model

NVS-IP100029SP

Power SupplyAC 220V 50/60Hz, PoE+ (IEEE802.3at)
Standby Power Consumption
≤3W
Power Output
2×30W (at AC 220V/50Hz powered) 

2×7W (at PoE+ powered)
Audio CodecMP3, PCM, G.711 A-law, G.711 μ-law
Sensitivity (1W, 1m)
86dB±3dB 
Maximum SPL 
92dB±3dB
Signal to Noise Ratio
≥80dB
Audio Sampling & Bit Rate
8kHz~44.1kHz, 16bit, 8kbps~320kbps
Frequency Response35Hz~18kHz
Network Interface
10BASE-T/100BASE-TX RJ45 
Network Protocol
SIP (RFC3261),FTP,HTTP,TCP/IP,UDP,ARP,ICMP,IGMP
Configuration Method
Web Interface or DevConfig Tool 
Mounting Method 
Wall Mounted
Installation Environment 
Dry Indoor Locations Only
Operating Temperature 
-10℃~+45℃ (14℉~113℉)
Storage Temperature
-20℃~+65℃ ( 4℉~149℉)
Operating Humidity
10%~90% RH Non-Condensing
Grille Material Mesh Cloth
Grille Colour 
Off White
Colour
Off White
Cabinet Material 
SGS Certified Medium Density Fiberboard 
Cabinet Colour 
White
Product Weight
3.7 Kg
Product Dimensions 290x215x117 mm
Packaging
Carton Box
Packed Dimensions
370x360x320 mm
Packed Weight
4.0 Kg 










Part NumberDescriptionStandard Quantity 
NVS-IP100029SP30W Wall mount IP Speaker
01

ACCESSORIES INFORMATION

DescriptionStandard Quantity 
2 Pin Pluggable Terminal Block Connector (5.0mm Pitch, AWG 26 16)
01
3.5mm Male to Male Stereo Audio Cable (Length: 2.5m)
01
Phillips Pan Head Self Tapping Screw
03
Plastic Self Drilling Drywall Anchors
03
Quick Installation Guide
01
Quality Certificate
01
Warranty Card 
01