Door Sensor

Door Sensor

The door sensor contacts to the host device and directly monitors the open/close statues of door in the equipment room. An alarm will be sent when the door is open.

The door sensor contacts to the host device and directly monitors the open/close statues of door in the equipment room. An alarm will be sent when the door is open.

Cable length

Customizable (Max. 5m)

Fixation method

By affixing

Connection Method

RJ11 Connector

Door magnetic monitoring

When the door is open, an alarm will be sent

Working Temperature

0°C~55°C

Relative Humidity

10-90 %

INSTALLATION

  • Install the magnet on the removable door(window), and the switch on the frame of door(window).
  • The two parts magnet and switch must be installed side by side, without dislocation. When the door (window) is closed, the gap between the two parts can not exceed 10mm. (If there are iron items near by, the gap should be decided based on the actual situation.)
  • Connect the door sensor to the port of door on the front panel of devices
  • The sensor should be out of reach of children and animals, such as on the top of door.
Part Number Height (U)

155-DS02X

Door Sensor