Norden fast connectors are factory pre-polished, field-installable connectors that completely eliminate the need for hand polishing in the field. These fast connectors are compatible with 0.9 mm tight buffer, 2 mm & 3 mm drop cable. This connector during the installation process does not require any adhesive and curing process. It is possible to rework so can be reduced the defect rate by worker’s connection error.
Norden fast connectors are factory pre-polished, field-installable connectors that completely eliminate the need for hand polishing in the field. These fast connectors are compatible with 0.9 mm tight buffer, 2 mm & 3 mm drop cable. This connector during the installation process does not require any adhesive and curing process. It is possible to rework so can be reduced the defect rate by worker’s connection error.
|
Connector Ferrule |
Zirconia Ceramic with a pre-polished fibre stub |
||||||||||||
|
Alignment Sleeve |
Zirconia or Phosphor Bronze |
||||||||||||
|
Connector Body |
UL 94V-0 rated Thermoplastic |
||||||||||||
|
Crimp Insert/Crimp Tube |
Nickel-Plated Brass/Thermoplastic Elastomer Polymer |
||||||||||||
|
Dust Cap |
Nylon or PVC |
||||||||||||
|
Strain Relief Boot |
Flame retardant (UL-Rated 94-V0) polymer |
||||||||||||
|
Connector Style |
SC, FC, ST, LC, MTRJ, E2000 |
||||||||||||
|
Polish |
PC, UPC & APC |
||||||||||||
|
Ferrule Diameter |
|
|
Operating Temperature |
-40 ºC to +85 ºC |
|
Storage Temperature |
-40 ºC to +85 ºC |
|
Type-1 |
|
|
Temperature Cycling (61300-2-18) |
-40 ºC to +75 ºC, 40 cycles=0.2 dB change |
|
High Temperature (61300-2-18) |
70˚c for 96 Hrs, <0.4dB change |
|
Damp Heat(61300-2-19) |
40º C at 93 % RH for 96 Hrs, < 0.4 dB change |
|
Vibration-Mated Pair (61300-2-1) |
10-55 Hz,1.5 mm P to P < 0.2 dB change |
|
Mating Durability (61300-2-2) |
500 Mating Cycles, clean every 25, < 0.2 dB change |
|
Operating Temperature |
-40 ºC to +85 ºC |
|
Type-2 |
|
|
Twist test Condition |
15N load, 5 cycles in a test |
|
Pull test Condition |
30N load, 120sec
|
|
Drop test Condition |
At 1.5m, 10 repetitions |
|
Durability test |
Condition 200 repetition connecting/disconnecting |
|
Vibrate test |
Condition 3 axes 2hr/axis,1.5mm(peak-peak), 10 to 55Hz(45Hz/min |
|
Thermal Aging Condition |
+85°C±2°C, 96 hours |
|
Humidity test Condition |
90 to 95%RH, Temp75°C for 168hrs |
|
Thermal Cycle Condition |
-40 to 85°C, 21 cycles for 168 hours |
| Item | Single mode | Multimode |
|
| UPC | APC | ||
| Insertion Loss/connector ( Type 1&2) | ≤0.3dB | ≤0.3dB | ≤0.3dB |
| Fiber retention force ( Type 1&2) | <30N (<0.3dB with impressed pressure) | ||
| Return Loss(Type –1) | ≥55dB | ≥50dB | ≥50dB |
| Return Loss(Type –2) | Min.>45dB,Typ.>55dB | Min.>55dB, Typ. >55dB | ≥50dB |
ANSI/TIA-568-C.3
ANSI/TIA-604-3 (SC),-10A(LC) Connector Intermateability
Standards.
Meets GR-326; General Requirements for Single Mode
Connectors.
Easy assembly process
No polish, No epoxy required
Factory polishing eliminates loss concerns
Intra-building backbone, LAN cross connects, LAN & WAN data
transmission.
Direct equipment termination.
Fibre Diameter | 125 μm |
Fibre Cable Type | 2.0 mm, 3.0 mm drop cable & 0.9 mm Tight Buffer |
Coupling Type | Snap, Push Pull Type |
Tight Buffer Diameter | 250 μm |
Fiber Mode | Single Mode |
Temperature | -40 ºC to +85 ºC |
Colour | Green (APC), Blue (UPC) |
| Part Number | Description |
| Type-1 | |
| 37-SSC3 | SC/APC Singlemode Fast Connector |
| 37-SLC3 | LC/APC Singlemode Fast Connector |
| 37-SSC2 | SC/UPC Singlemode Fast Connector |
| 37-SLC2 | LC/UPC Singlemode Fast Connector |
| 37-MLC1 | LC/PC Multimode Fast Connector- Simplex |
| 37-DLC1 | LC/PC Multimode Fast Connector- Duplex |
| Type-2 | |
| 37-SSC32 | SC/APC Single Mode Fast Connector, 61.5mm |
| 37-SLC32 | LC/APC Single Mode Fast Connector, 61.5mm |
