360 TUNE CAST SMART SPEAKER NVS-IP100040SP

The NVS-IP100040SP is a 360 Tune Cast Smart Speaker that is combined with audio and wireless communication. Using sound intelligence equalization algorithms, the built-in 4-channel independent speakers provide a 360° omnidirectional sound generating system that ensures balanced coverage at a reasonable sound pressure level. It has a 3.5mm line input interface for external audio input from several sources, such as a computer or mobile phone. The built-in EQ adjustment and preset sound styles that can be specifically tuned to the live environment.

Quick Enquiry DATASHEET

The NVS-IP100040SP is a 360 Tune Cast Smart Speaker that is combined with audio and wireless communication. Using sound intelligence equalization algorithms, the built-in 4-channel independent speakers provide a 360° omnidirectional sound generating system that ensures balanced coverage at a reasonable sound pressure level. It has a 3.5mm line input interface for external audio input from several sources, such as a computer or mobile phone. The built-in EQ adjustment and preset sound styles that can be specifically tuned to the live environment. 

FEATURES

  • Built-in 4 channels amplifier output
  • Bluetooth 5.0, allows Bluetooth devices to connect and play audio
  • All-in-one design, ceiling or bracket mounting
  • Built-in wireless microphone receiver module
  • Supports wireless microphone
  • Supports optional network broadcast module
  • Supports standard SIP protocol for easy integration with mainstream SIP PBX like Yeaster, Asterisk, Cisco etc)


SPECIFICATIONS

Model

NVS-IP100040SP

Frequency Response
53Hz-18KHz (±3dB)
Sensitivity(1m/1w)95dB 
Audio Sampling Rate8kHz~44KHz, 16 bit
Network Interface10BASE-T / 100BASE- TX RJ45
Network ProtocolTCP/IP, UDP, ARP, ICMP, IGMP
Operating Temperature-10°C~+55°C
Operating Humidity10%~90% RH non-condensing
Output Power4x10W
Power SupplyAC100~240V,50/60Hz
Standby Power Consumption ≤4W
Weight7.5Kg
Dimension402x402x208mm




Instructions:

  1. Drive two expansion hooks and four expansion screws into the side and bottom of the beam-column, respectively (the equipment installed in the bracket determines where the expansion hooks should be, and the rope is stretched aer the wire rope is gently hung to the expansion hook).
  2. Tighten the bracket on the bottom of the beam-column with nuts (including spring washer and gasket), so that the bracket is fixed on the bottom of the beam-column.
  3. Hang the steel wire rope on the expansion hook, then slide the equipment into the bracket through the open end of the guide rail on the equipment, and fix the equipment on the bracket with two M5*12 cross screws and lock it.

Note: The indicator of the speaker must face the platform.

Part NumberDescriptionStandard Quantity
NVS-IP100040SP
360 Tune Cast Smart Speaker
01

Related Products