Norden Category 6 S/FTP patch cords are manufactured using high quality shielded four pair Category 6 stranded cable, and feature cable strain relief boots with a plug latch protection cap. This patch cord when used with high performance Norden Category 6 connectivity (Solid shielded cable, patch panels and work area outlets), provide superior performance capabilities of high bandwidth (Gigabit 1000Base-T and 1000Base-Tx) applications support. This is fully backward compatible to Category 5e (Class D) products_backup. Each patch cord is tested with Fluke tester and individual cover include with the report. Norden Category 6 Patch cord is tested for transmission frequencies of up to 250 MHz.
Norden Category 6 S/FTP patch cords are manufactured using high quality shielded four pair Category 6 stranded cable, and feature cable strain relief boots with a plug latch protection cap. This patch cord when used with high performance Norden Category 6 connectivity (Solid shielded cable, patch panels and work area outlets), provide superior performance capabilities of high bandwidth (Gigabit 1000Base-T and 1000Base-Tx) applications support. This is fully backward compatible to Category 5e (Class D) products_backup. Each patch cord is tested with Fluke tester and individual cover include with the report. Norden Category 6 Patch cord is tested for transmission frequencies of up to 250 MHz.
IEEE 802.af and IEEE 802.3at for PoE applications
ANSI/TIA-568-C.2 and ISO/IEC-11801 (2nd Edition)
IEC 61156-2, EN 50173; EN 50288-6-2 Category 6 standard
Basic Cable Conductor |
Stranded Bare Annealed Copper |
Wire Insulation |
SFS PE |
Individual Pair Shield |
Polyester-Aluminium foil |
Overall Shield |
Tinned Copper, Braid |
Outer Jacket and Boots |
LSZH/PVC |
Cable O.D. |
5.7 ± 0.2 mm |
Bend Radius |
> 23 mm Without load |
Storage Temperature |
-20°C to +80°C |
Temperature Operating Range |
-20°C to +75°C |
Flame Test |
IEC 60332-1 (LSZH) |
Impedance @ 1-100MHz |
100 ±15 Ω |
Impedance @ 100-250MHz |
100 ±15 Ω |
Conductor Resistance |
<73 Ω/km |
Contact Resistance |
20 MΩ max. |
Resistance Unbalance |
2 % max. |
Voltage Rating |
72 Vdc |
Dielectric Strength |
1 KV/min. rms |
Ampacity |
1.0 Amps max. |
Insulation Resistance |
150 MΩ/Km |
Transfer Impedance |
N/A |
Pair To Ground Capacitance Unbalance |
3.3 nF/Km nom. |
Cable To Plug Tensile Strength |
96 N min. |
Pulling Force |
10 N max. |
Durability |
1000 Mating Cycles |
Propagation Delay 1-250MHz |
< 25 ns/100m |
Freq. MHz |
Attenuation dB/100m @ 20°C | RL(dB) min. | ||
2m cord | 5m cord | 10m cord | ||
1 |
68.0 |
68.0 |
68.0 |
20.0 |
4 |
65.0 |
65.0 |
65.0 |
21.8 |
10 |
64.8 |
64.2 |
62.8 |
22.5 |
20 |
60.9 |
58.6 |
57.2 |
23.4 |
30 |
56.2 |
54.9 |
53.6 |
23.0 |
60 |
50.4 |
49.2 |
48.1 |
20.0 |
100 |
46.4 |
45.3 |
44.4 |
18.0 |
125 |
44.5 |
43.5 |
42.7 |
17.0 |
150 |
43.2 |
42.2 |
41.1 |
16.2 |
200 |
40.8 |
39.6 |
39.1 |
15.0 |
250 |
38.8 |
37.9 |
37.6 |
13.8 |
Part Number | Description | Length |
127-M1501X |
Category 6 S/FTP Patch Cord E-Series PVC 01m |
1m |
127-M1502X |
Category 6 S/FTP Patch Cord E-Series PVC 02m |
2m |
127-M1503X |
Category 6 S/FTP Patch Cord E-Series PVC 03m |
3m |
127-M1505X |
Category 6 S/FTP Patch Cord E-Series PVC 05m |
5m |
127-M1510X |
Category 6 S/FTP Patch Cord E-Series PVC 10m |
10m |
127-M1515X |
Category 6 S/FTP Patch Cord E-Series PVC 15m |
15m |
127-M1520X |
Category 6 S/FTP Patch Cord E-Series PVC 20m |
20m |
127-M1525X |
Category 6 S/FTP Patch Cord E-Series PVC 25m |
25m |
127-M2501X |
Category 6 S/FTP Patch Cord E-Series LSZH 01m |
1m |
127-M2502X |
Category 6 S/FTP Patch Cord E-Series LSZH 02m |
2m |
127-M2503X |
Category 6 S/FTP Patch Cord E-Series LSZH 03m |
3m |
127-M2505X |
Category 6 S/FTP Patch Cord E-Series LSZH 05m |
5m |
127-M2510X |
Category 6 S/FTP Patch Cord E-Series LSZH 10m |
10m |
127-M2515X |
Category 6 S/FTP Patch Cord E-Series LSZH 15m |
15m |
127-M2520X |
Category 6 S/FTP Patch Cord E-Series LSZH 20m |
20m |
127-M2525X |
Category 6 S/FTP Patch Cord E-Series LSZH 25m |
25m |