Maxpower RM Series is a small to medium power transformer-less UPS of CellNor. This series is the classic product of CellNor. It releases very early and designs with high standard; This series is improved continually combined with customers’ application feedback, and it became a very cost-effective product series. This product series has a very good sale performance , and received highly praises from customers. The categories of this UPS are abundant, and the product is stable and reliable, it can meet the demands of small to medium power UPS of customers.
Maxpower RM Series is a small to medium power transformer-less UPS of CellNor. This series is the classic product of
CellNor. It releases very early and designs with high standard; This series is improved continually combined with customers’
application feedback, and it became a very cost-effective product series. This product series has a very good sale
performance , and received highly praises from customers. The categories of this UPS are abundant, and the product is
stable and reliable, it can meet the demands of small to medium power UPS of customers.
High power density
Rack/Tower convertible design
N+X parallel redundancy support maximum 4 unit in parallel
Online double conversion with full digital control
Wide input voltage range:110~286Vac
Wide input frequency range
Generator compatible
ECO mode operation for energy saving
Self-testing when UPS start-up
Maximum charging current up to 10A
Cold start
Intelligent fan speed regulation
| Model | CN7006MP-RM | ||
|
Capacity |
VA |
6000 |
|
|
Watts |
5400 |
||
|
Input |
Normal Voltage |
220/230/240Vac(L+N+PE) | |
|
Operating Voltage Range |
110~286Vac |
||
|
Operating Frequency Range |
40~70Hz (50/60Hz Auto-Sensing) |
||
|
Power Factor |
≥0.99 |
||
|
Bypass voltage range |
Max. voltage: 220V: +25%(optional +10%,+15%,+20% ) |
||
| Bypass frequency range | Frequency protection range:±10% | ||
|
ECO range |
Same as the bypass |
||
|
Harmonic distortion (THDi) |
≤2% with linear load, ≤5% with non-linear load |
||
|
Generator input |
Support |
||
|
Output |
Output voltage |
220/230/240Vac | |
|
Power factor |
0.9 |
||
|
Voltage Regulation |
±1% |
||
|
Frequency |
Line mode |
±1%/±2%/±4%/±5%/±10% of the rated frequency(optional) | |
|
Bat. mode |
50/60(±0.1)Hz |
||
|
Crest Factor |
3:1 |
||
|
Harmonic Distortion (THDv) |
≤2% with linear load, ≤5% with non-linear load |
||
|
Efficiency |
>94% |
||
|
Battery |
Battery voltage |
192/216/240Vdc (16/18/20pcs) | |
|
Backup time |
Depends on the capacity of external batteries Estimated remaining time displayed on the LCD |
||
|
Typical recharging time |
6~8 hours (to 90% of full capacity) |
||
|
Charging current |
Maximum current 10A; charging current can be set according to battery capacity installed. |
||
|
System |
Transfer time |
Mains to battery:0ms; Inverter to bypass:0ms | |
|
Overload |
Line mode |
Load≤110%:60min; ≤125%:last 10min; ≤150%:last 1min;>150% turn to bypass mode | |
|
Bypass mode |
40A(Input breaker) |
||
|
Short circuit |
Hold whole system |
||
|
Overheat |
Line mode: Turn to bypass; Backup mode: shut down UPS immediately |
||
|
Battery low |
Alarm and switch off |
||
|
Self-diagnostics |
Upon power on and software control |
||
|
Battery |
Advanced battery management |
||
|
Audible & Visual alarms |
Line failure, Battery under voltage, Overload, System fault |
||
|
LED & LCD display |
Line mode, Bat. mode, Eco mode, Bypass mode, Battery under voltage, Overload & UPS Fault |
||
|
LCD display |
Input voltage, Input frequency, Output voltage, Output frequency, Load percentage, Battery voltage, |
||
|
Communication interface |
RS232,USB,SNMP card(optional), Relay card (optional) |
||
|
Environment |
Operating temperature |
0~40°C | |
|
Storage temperature |
-25~55°C |
||
|
Humidity range |
20~95% (Non-condensing) |
||
|
Altitude |
<1500m |
||
|
Noise level |
<55dB at 1Meter |
||
|
Physical |
Dimension |
440 x 625 x 86.5 | |
|
Weight |
16 |
||
|
Standards |
Safety |
IEC/EN62040-1,IEC/EN62477-1 | |
|
EMC |
IEC/EN62040-2,IEC61000-4-2,IEC61000-4-3,IEC61000-4-4,IEC61000-4-5,IEC61000-4-6,IEC61000-4-8 IEC61000-4-11,IEC61000-2-2
|
||
EXTERNAL BATTERY PACK
| MODEL | CNBC06120CR | ||
| BATTERY SYSTEM | |||
Battery type | VRLA (Valve Regulated Lead Acid Battery - SMF) | ||
Typical battery recharging time | 6~8 hours (to 90% of full capacity) | ||
| Typical battery life | 3~5 years, depend on discharging cycle and ambient temperature | ||
| System voltage | 240Vdc | ||
| Battery quantity | 20 PCS
| ||
| Capacity | 9Ah/12V | ||
| PHYSICAL | |||
| Dimension W x D x H (mm) | 440 x 680 x 131 | ||
| Net weight (kg) | 58/63 | ||
| ENVIRONMENT | |||
| Operating environment | 0°C~40°C | ||
| Relative humidity | 0~95% (Non condensing) | ||
| Noise level | <40dB at 1 Meter | ||
| Part Number | Description | ||
|
CN7006MP-RM |
6kVA Online Transformer-less Rack Mount UPS (External Battery) |
||
|
CNBC06120CR |
240VDC Rack Mount Battery Pack | ||
| Part Number | Description | ||
| CNRM0110R | Rack Mounting Rail Kit for 1-10kVA RM UPS | ||
| CNRM0110BPR | Battery Pack Rack Mounting Rail Kit for 1-10kVA RM UPS | ||
| CNS02 | Mini SNMP Card | ||
