Norden Category 6 UTP flat patch cords are manufactured using high quality unshielded four pair Category 6 stranded cable ,and feature cable strain relief boots with a plug latch protection cap. This patch cord when used with high performance. Each patch cord is tested with Fluke tester and individual cover include with the report. Norden Category 6 Patch cord is tested for transmission frequencies of up to 250 MHz.
Norden Category 6 UTP flat patch cords are manufactured using high quality unshielded four pair Category 6 stranded cable ,and feature cable strain relief boots with a plug latch protection cap. This patch cord when used with high performance. Each patch cord is tested with Fluke tester and individual cover include with the report. Norden Category 6 Patch cord is tested for transmission frequencies of up to 250 MHz.
ANSI/TIA-568.2-D and ISO/IEC-11801 (2nd Edition),
IEC 61156-2,EN 50173; EN 50288-6-2 Category 6 standard
Cable Conductor | Stranded Bare Annealed Copper |
Conductor Size | 30 AWG |
Wire Insulation | PE |
Outer Jacket And Boots | PVC |
Cable Width | 6.0 ± 1.6 mm |
Bend Radius | 23 mm without load |
Storage Temperature | -20 °C to +80 °C |
Temperature Operating Range | -20 °C to +75 °C |
Wire Scheme | T568B |
Impedance @ 1-250 MHz | 100 ±15 Ω |
Contact Resistance | 20 MΩ max. |
Voltage Rating | 72V DC |
Dielectric Strength | 1 KV/min.rms |
Ampacity | 1.0 Amps max. |
Insulation Resistance | 150 MΩ/Km |
Pair to Ground Capacitance Unbalance | 3.3 nF/Km nom. |
Cable To Plug Tensile Strength | 96 N min. |
Pulling Force | 10 N max. |
Durability | 1000 Mating Cycles |
Propagation Delay 1-250 MHz | < 45 ns/100m |
| Part Number | Description | Length |
12F-31101X | Category 6 U/UTP Flat Patch Cord PVC 01m | 1m |
12F-31102X | Category 6 U/UTP Flat Patch Cord PVC 02m | 2m |
12F-31103X | Category 6 U/UTP Flat Patch Cord PVC 03m | 3m |
12F-31105X | Category 6 U/UTP Flat Patch Cord PVC 05m | 5m |
X: GY(Gray)
